TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 86 / 116

82 TruVision Series 7 IP Camera Configuration Manual
S1 stands for the target body part that enters the pre-defined region ST stands for
the complete target body.
Example: if you set the value as 60, the action can be counted as a region entrance
action only when 40 percent body part enters the region.
9. Repeat the above steps to configure other regions. Up to four regions can be set.
You can click the Clear button to clear all pre-defined regions.
10. Click Arming Schedule to set the arming schedule.
11. Click Actions to select the linkage methods.
12. Click Save to save the settings.
Region exit detection
This function detects people, vehicle or other objects which exit from a pre-defined
virtual region. It can be set up to trigger a series of alarm actions.
To set up the region of exit detection:
1. Click Configuration > Event > Smart Event > Region Exiting Detection .
2. Select the Enable check box to enable the function.
3. Select Region from the drop-down list to set up.
4. Click Area Settings and click Draw Area button to start the drawing area.