TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 66 / 116

62 TruVision Series 7 IP Camera Configuration Manual
To set up motion detection in normal mode:
1. Click Configuration > Event > Basic Event > Motion Detection .
• Set up the motion detection area:
2. Select the Enable Motion Detection check box. Select the Enable Dynamic
Analysis for Motion check box if you want to see real-time motion events.
Note: If you do not want the detected object to be marked with the green frame,
select Disable from Configuration > Local Configuration > Live View Parameters >
Enable Meta Data Overlay.
3. Select Normal mode from the drop-down list.
4. Click Draw Area . Click and drag the mouse on the live video image to draw an area
sensitive to motion detection.
Note: You can draw up to eight motion detection areas on the same image.
5. Click Stop Drawing to finish drawing. Click Clear All to delete all areas marked and
restart drawing.
6. Move the Sensitivity slider to set the sensitivity of the detection. All areas will have
the same sensitivity level.
• Set up the arming schedule:
7. Drag and click the time bar to edit the arming schedule. In the pop-up box, enter the
start and end times (hour and minutes).
8. Click to copy the schedule to other days or to the whole week.
• Set up linking method to the motion detection alarm:
9. Click Actions to specify when an event occurs. Select one or more response
methods for the system when a motion detection alarm is triggered:
Send Email Send an email to a specified address when there is a motion detection
alarm.
Note: You must configure email settings before enabling this option.
See “To set up the email parameters” on page 42 for further
information. If you want to send the event snapshot together with the
email, check the
Attached Snapshot option.
Notify Alarm Recipient Send an exception or alarm signal to remote management software
when an event occurs.