TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 49 / 116

TruVision Series 7 IP Camera Configuration Manual 45
Integration protocol parameters
If you need to access the camera through the third-party platform, you can enable STD-
CGI function. If you need to access the camera through the ONVIF protocol, you can
configure ONVIF from this interface. Refer to ONVIF standard for detailed configuration
rules.
To set up the integration protocol parameters:
1. Click Configuration > Network > Advanced Settings > Integration Parameters .
2. Select the STD-CGI Authentication method. Digest/basic indicates using digest as
priority if supported by the communication. If it is not supported, basic authentication
will be the backup.
3. Select the Enable STD-CGI check box to enable the STD-CGI protocol.
4. Select the Enable ONVIF check box to enable the ONVIF protocol.
5. Click Save to save changes.
Network service parameters
Use this function to enable or disable certain protocols supported by the camera.
Unused functions should be disabled for security reasons. Supported functions depend
on the camera model.
• WebSocket : To access the camera, enable this function if using Google Chrome
version 45 and higher or Mozilla Firefox 52 and higher. If not enabled, live view,
image capture and digital zoom cannot be used with these browsers.
• Websockets : To access the camera, enable this function if using Microsoft Internet
Explorer.
• SDK Service and Enhanced SDK Service : Enable these functions to be able to
use the device with a VMS (like TruVision Navigator or a third-party software using
the SDK).
SDK Service uses the SDK protocol. Enhanced SDK Service uses SDK
over TLS (Transport Layer Security).