TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 21 / 116

TruVision Series 7 IP Camera Configuration Manual 17
2. Select the Smart Event check box to enable the metadata function. The metadata
of the smart event includes the target ID, target coordinates and time information.
3. Select Enable Stream Rule to overlay the stream rule metadata on the live view
stream. The metadata in the video stream requires certain players to decode and
display. Make sure you have selected
Substream here and Substream in live view.
4. Select Overlay Rule Frame and Target Frame on Background Picture to enable
the function. The bounding boxes does not require proprietary players to decode
and display. Make sure you have selected
Substream here and Substream in live
view.
Housing settings
This page only applies to the TVC-571x Box cameras. Select the option Enable
communication with the housing to allow communication between the box camera and
the TVC-OH3-HT housing connected to it. The communication between camera and
housing is done via a wired RS-485 connection and is used for the camera to tell the
housing when the IR LEDs of the housing need to be switched on. This typically
happens when the camera switches to night mode.
Figure 4: Housing window
Open source software available
To obtain information about the open source software that applies to the IP camera,
select
Configuration > System Settings > About . Click the button “View Licenses” to
review Open Source Software Licenses.