TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 64 / 116

60 TruVision Series 7 IP Camera Configuration Manual
To set up an image parameter switch:
1. Click Configuration > Image > Image Parameters Switch .
2. Select the Scheduled D/N settings check box to enable this function.
3. Select the required Period check box, set the time period and the linked scene.
4. Click Save to save changes.
Motion detection alarms
You can define motion detection alarms. A motion detection alarm refers to an alarm
triggered when the camera detects motion. However, the motion alarm is only triggered
if it occurs during a programmed time schedule.
Select the level of sensitivity to motion as well as the target size so that only objects
that could be of interest can trigger a motion recording. For example, the motion
recording is triggered by the movement of a person but not that of a cat.
You can define the area on screen where the motion is detected, the level of sensitivity
to motion, the schedule when the camera is sensitive to detecting motion as well as
which methods are used to alert you to a motion detection alarm.
You can also enable dynamic analysis for motion. When there is motion, the area will
be highlighted as green.