TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 20 / 116

16 TruVision Series 7 IP Camera Configuration Manual
RS-485
The RS-485 serial port is used to control extra devices that support the 485 protocol
(Pelco D or Pelco P), such as PTZ devices, lighting devices or other devices. You can
also connect it to an analog PTZ camera to control PTZ movement.
You need to configure these parameters before connecting the camera to any devices.
To set up RS-485 settings:
1. Click Configuration > System > System Settings > RS485 .
2. Select the RS-485 port parameters.
Note: The Baud Rate, PTZ Protocol, and PTZ Address parameters should be
identical to the PTZ camera parameters.
3. Click Save to save changes.
Metadata Settings
Metadata is the raw data the camera collects before algorithm processing. The
metadata of intrusion detection, line crossing detection, region entrance detection,
region exiting detection, unattended baggage detection, object removal and face
capture can be uploaded. If enabled, the metadata of the corresponding event are
available for users to explore the possibility of various data usage.
To set up metadata settings:
1. Click Configuration > System > Metadata Settings .