TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 99 / 116

TruVision Series 7 IP Camera Configuration Manual 95
Detection line : Click this button to draw the detection line (yellow line). The object
entering or exiting across the line will be detected and counted.
Note :
The detection line should be drawn directly below the camera and cover the whole
entrance or exit.
Draw the detection line where fewer objects move back and forth.
Reverse flow : Click this button to change the entry/exit counting direction of the
detection line or A/B regions.
Delete : Click this button to remove the detection line used for counting.
Reset : Click this button to reset the number of entry and exit values counted to zero.
5. Set up the arming schedule:
a) Under the Arming Schedule tab, click the day you want to schedule. The Time
pop-box appears. Enter the desired start and end times to detect motion.
b) If you want to copy a day’s schedule, move the mouse cursor to the end of the
day. A pop-dialog box appears. Copy the schedule to other days or to the
whole week. The Copy to pop-up window appears. Select the desired days to
which to copy the schedule and click OK to save the changes.
6. Set up linking method when a counting event alarm occurs.
Under the Actions tab, select one or more response methods for the system when a
motion detection alarm is triggered:
Normal Actions This is a group selection. It automatically selects “Send Email”,
“Notify Alarm Recipient” and “Upload to FTP/NAS”.
Notify Alarm Recipient Send an exception or alarm signal to remote management
software when an event occurs.
7. Click Save to save changes.
e-PTZ
The e-PTZ (electronic pan, tilt and zoom) function is only supported via the fourth
stream.
To set up e-PTZ:
1. Click Configuration > e-PTZ .