TruVision 7 IP VF TVD-5715, Руководство по настройке

Страница: 92 / 116

88 TruVision Series 7 IP Camera Configuration Manual
Stream type
You can select to record main stream or substream.
Enable Auto Delete Mode
When enabled, recorded video older than the number of days defined by “Delete after”
will be automatically deleted, even if the full storage capacity has not been reached.
To set up a recording schedule:
1. From the menu toolbar, click Configuration > Storage > Schedule Settings >
Record Schedule .
2. Select the Enable check box to enable recording.
Note: To disable recording, deselect the option.
3. Edit the recording schedule. The following window appears:
4. Select whether the recording will be for the whole week ( All Day recording) or for
specific days of the week.
If you have selected “All day”, select one of the record types to record from the drop-
down list box:
• Continuous : This is continuous recording.
• Motion: Video is recorded when the motion is detected.
• Alarm: Video is recorded when the alarm is triggered via the external alarm
input channels. Besides configuring the recording schedule, you must also set
the alarm type and enable the
Trigger Channel check box in the Linkage Method
of Alarm Input Settings interface. For detailed information, please refer to the
section on alarm inputs on page 68.
• Motion | Alarm: Video will be recorded when the external alarm is triggered, or
the motion is detected. Besides configuring the recording schedule, you must
also configure the settings on the
Motion Detection and Alarm Input Settings