TruVision Series 7 IP Camera Configuration Manual
33
Network
Use the Network menu to set the desired network parameters to be able to access the
camera. There are two groups of network settings, Basic Settings and Advanced
Settings.
TCP/IP parameters
You can set up the following TCP/IP parameters:
Function
Description
NIC Type
Enter the NIC type. Default is Auto. Other options include: 10M Half-
dup, 10M Full-dup, 100M Half-dup and 100M Full-dup
DHCP
Enable to automatically obtain an IP address and other network
settings from that server.
IPv4 Address
Enter the IPv4 address of the camera.
IPv4 Subnet Mask
Enter the IPv4 subnet mask.
IPv4 Default Gateway
Enter the IPv4 gateway IP address.
IPv6 Mode
Enter the IPv6 mode: Manual, DHCP or Router Advertisement.
IPv6 Address
Enter the IPv6 address of the camera.
IPv6 Subnet Prefix
Length
Enter the IPv6 subnet prefix length value of the camera.
IPv6 Default Gateway
Enter the IPv6 default gateway value of the camera.
MAC Address
Shows the MAC address of the devices.
MTU
Enter the valid value range of MTU. Default is 1500.
Multicast Address
Enter a D-class IP address between 224.0.0.0 to 239.255.255.255.
Only specify this option if you are using the multicast function. Some
routers prohibit the use of multicast function in case of a network
storm.
Enable Multicast
Discovery
This function is optional. It enables the automatic detection of the
online network camera via private multicast protocol in the LAN.
DNS server
Specifies the DNS server for your network.
Содержание 7 IP VF TVD-5715
Страница 1: ...TruVision Series 7 IP Camera Configuration Manual P N 1018 EN REV A ISS 29SEP20...
Страница 4: ......
