Trumpf TruConvert AC 3025, Руководство оператора

Страница: 56 / 80

Addr Description Unit Res
olu-
tion Default Min Max Dat
atyp
e Typ
e Len
gth FCr FCw
1018 Setting for connected sys-
tem configuration:
No config = 0,
Simulator = 1,
DC-DC only = 2,
n*AC-DC m*DC-DC = 3
- 1.0 0 0 6 UIN
T16 Regi
ster 1 03 06
1028 Variable to save or reset
customer values:
1: save parameter
-1: restore default settings
- 1.0 0 -1 1 INT
16 Regi
ster 1 03 06
Information system
2000 Serial number system
control Strin
g UIN
T32 Regi
ster 2 04 16
2008 Serial number AC-DC
module - 1.0 0 UIN
T32 Regi
ster 2 03 16
Nominal values
4000 Power stage configuration:
1 = power stage on
0 = power stage off
- 1.0 0 0 1 UIN
T16 Coil 1 01 05
4001 Configuration nominal val-
ues AC for phases L1 -
L3:
1 = symmetric
0 = asymmetric (individ-
ual configuration possible)
- 1.0 1 0 1 UIN
T16 Coil 1 01 05
4002 Resets current alarm and
warning messages - 1.0 0 0 1 UIN
T16 Coil 1 01 05
4005 Precharge DC link config-
uration:
0 = device waits for exter-
nal precharge of DC link
1 = device precharges
external DC link to neces-
sary start-up voltage
2 = behaviour similar to
1 with additional support
of DC submodules (nec-
essary for island opera-
tion)
- 1.0 1 0 2 UIN
T16 Regi
ster 1 03 06
4006 Sets reference frame con-
vention (0 = producer ref-
erence frame; 1 = con-
sumer reference frame) - 1.0 0 0 1 UIN
T16 Regi
ster 1 03 06
4007 Specifies the slave that
will be addressed (0 =
broadcast / same values
for all slaves) - 1.0 0 0 16 UIN
T16 Regi
ster 1 03 06
50
Operation 2020-06-10 A67-0141-00.BKEN-
001-05