Trumpf TruConvert AC 3025, Руководство оператора

Страница: 49 / 80

1 Display of the current device
status
2 Main operating parameters
(start page)
3 Device configuration (time and
network settings)
4 Software update
5 Device identification (display
only)
6 Submenu
7 Sidebar (alarm, warning and
event messages)
Start screen Fig. 28
The system control balances the set system configuration
with the actually connected modules. If both values match,
the start screen of the web-based user interface is displayed.
If the set system configuration ("Expected Configuration") dif-
fers from the automatically detected system configuration
("Detected Configuration"), the initial commissioning screen
is displayed again and a message output. Press sidebar (7)
to display the messages.
12. Select > Operation > AC-DC module settings .
13. Every input in the following steps must be confirmed with
the enter key
↲
.
1 Input field 2 Value applied in the system
Confirm input Fig. 29
The value applied in the system is then displayed to the
right next to the input field.
14. To ensure that the settings apply to all AC-DC modules:
A67-0141-00.BKEN-
001-05 2020-06-10 Operation
43
Setting process set values
(AC settings)