Trumpf TruConvert AC 3025, Руководство оператора

Страница: 43 / 80

■ Contactor supply (4)
−
Is switched via device-internal switching contact (11).
− Permissible operational data for switching contact: 24 –
60 VDC, 5 A or 85 – 277 VAC, 5 A.
− The 24 VDC supply voltage can be used to supply the
mains contactor if necessary if voltage and power are
sufficient.
■ Circuit breaker for mains voltage measurement (9)
(see "Interfaces", pg. 18)
Note
Observe regional requirements for the mains connection!
The regional requirements must be clarified at the customer’s
location with the mains operator before the device is connected
and commissioned.
6.7 Setting grid codes
Grid codes define rules that generation systems must obey in
order to gain access to the mains grid. In particular, these rules
regulate behavior in the event of mains fluctuations.
The mains operator determines the behavior of systems in the
event of undervoltage, overvoltage and frequency deviation, and
also defines the connect and disconnect conditions.
A67-0141-00.BKEN-
001-05 2020-06-10 Installation
37