Trox Technik X-CUBE, Руководство по транспортировке и установке

Страница: 47 / 100

5.8 Integrating the air handling unit
with the central BMS
It is the duty of the system owner/HVAC contractor to
integrate the air handling unit with the building services
and to ensure conformity, Ä ‘System owner's obliga-
tions’ on page 7 and
Ä
‘Conformity assessment’
on page 20 .
5.9 Connecting the controls to your PC
or local network
Network or PC
Air handling units with optional integral controls are
fitted with a touch panel on which the configuration and
control parameters of the unit are displayed. This allows
you to view all measured values and to enter setpoint
values.
You can use a computer with a web browser instead of
the touch panel to display the unit configuration. To do
so, connect the air handling unit to a PC or integrate it
with a network using the TCP/IP interfaces.
The network integration procedure depends on the type
of controller.
XC8090 - Ä ‘Integration with the network, setting the
IP address’ on page 47
XC9020 - Ä ‘Integration with the network, setting the
IP address’ on page 50
The controller is installed in the switch cabinet for the air
handling unit.
5.9.1 X-CUBE controller CX8090
Integration with the network, setting the IP address
Personnel:

Skilled qualified electrician

Network administrator
For more information refer to
https://infosys.beckhoff.com/content/1031/cx8090/html/
cx8090_title.htm?id=1470
Installation
Connecting the controls to your PC or local network > X-CUBE controller CX8090
Air handling unit X-CUBE 47