11.
Stand on the operating side and push the upper
casing unit onto the lower casing unit.
Pushing the upper casing unit from the
back onto the lower casing unit
If there is not enough space on the operating
side of the AHU (enough space: unit depth),
you may also push the upper casing unit from
the back onto the lower casing unit that con-
tains the plate heat exchanger. In this case you
have to remove the doors, panels and frame
sections on the operating side of the upper
casing unit.
12.
Install the frame section (2) and the back
panel (1).
Setup and assembly
Setting up and assembling the air handling unit > Installing the plate heat exchanger
Air handling unit X-CUBE
31
