2.
Use a network cable to connect to port X000 the
PC or notebook on which you have installed
‘Cerhost’
. If the port is already being used, e.g.
for the touch panel, pull out the cable.
3.
Start
‘Cerhost’
.
ð
The starting screen is displayed.
Fig. 49: File menu
4.
Go to the
‘File’
menu and select
‘Connect’
.
In the
‘Connect’
window enter IP address
192.168.0.200
and confirm your entry with OK.
ð
When the connection has been established, a
window opens and the script is executed.
Fig. 50: Script window
Fig. 51: Start menu
5.
Go to the Start menu and select
‘Control Panel’
.
Fig. 52: Control panel
6.
In the
‘Control Panel’
window click on
‘Network
and Dial-up Connections’
.
Installation
Connecting the controls to your PC or local network > X-CUBE controller CX9020
Air handling unit X-CUBE
51
