3.
Remove the frame sections.
ð
What is looks like after steps 1 - 3
Installing the heat exchanger
4.
If the plate heat exchanger consists of blocks that
have been supplied individually, you have to
assemble them before you can install the heat
exchanger in the AHU casing unit. See the docu-
mentation from the plate heat exchanger manu-
facturer (appendix).
5.
Ensure that the bypass damper (1) and the recir-
culation damper (2), if any, are in the correct posi-
tion. The bypass damper has to face the outdoor
air flow, the recirculation damper has to face the
extract air flow.
6.
Remove the two brackets (1).
Place the heat exchanger (2) in front of the AHU
casing unit (e.g. with a forklift), then push it onto
the guiding rails (bottom and sides, see detail
views). Ensure the correct position of the bypass
damper (3)!
Setup and assembly
Setting up and assembling the air handling unit > Installing the plate heat exchanger
Air handling unit X-CUBE
29
