TrinityHighway.com
42
Revision C September 2021
Maintenance and Repair
Important:
Inspections are recommended, as needed, based upon volume of
traffic and impact history. Visual Drive-By Inspections are recommended at least
once a month. Walk-Up Inspections are recommended at least once a year.
Visual Drive-By Inspection
1) Encountering a system with the Hit Indicator in the vertical position mandates inspection
of the system. A walk-up inspection will be necessary.
2) Inspect the system in accordance with the QuadGuard
®
Elite M10 Maintenance Flow Chart
(p. 48).
Caution:
It is important to inspect a system after it has been impacted even if it
appears to be self-restored and fully maintained. In particular, check the Fender
Panels/Diaphragm attachment bolts to be sure none have failed.
3) Be sure the Nose assembly is in place and in good condition.
4) Note the location and condition of the QuadGuard
®
Elite M10 and the date of visual drive-
by inspection.
Walk-Up Inspection
Warning:
A system that has been impacted can store energy in collapsed
Cylinders and may spring back unexpectedly causing possible serious injury. Use
caution when inspecting, disassembling or restoring systems that are collapsed or
compressed by any amount.
Maintenance Checklist
1) Clear and dispose of any debris on the site. Check along length of Monorail and remove
any debris.
2) All bolts are tight and rust free.
3) Monorail Anchor Nuts are securely anchored.
4) Diaphragm Legs are straight.
5) All Mushroom Washer Assemblies are properly aligned and positioned (p. 44).
6) Fender Panels and Transition Panels should nest tightly against the system. For wrong
way traffic, the maximum gap allowed is .78” [20 mm].
7) All Cylinders are in good condition and are properly positioned within each Bay.
8) Always inspect system if the Hit Indicator is in the UP position even if the system appears
normal.
9) Reset Hit Indicator after inspection and restoration of the QuadGuard
®
Elite M10.
Содержание QuadGuard Elite M10
