Trinity Highway QuadGuard Elite M10, Руководство по сборке изделия

Страница: 35 / 60

TrinityHighway.com 34 Revision C September 2021
Be sure Mushroom Washers lay flat against the Fender Panel as shown below. Stand-off on
Mushroom Washer must be seated completely through slot (Figure 28).
Continue attaching Fender Panels until you reach Diaphragm No. 2. Figure 29 shows the location
of Diaphragm No. 2.
9) Cylinder Assembly
All QuadGuard ® Elite M10 systems utilize three Cylinder types. Bay 1 contains a Cylinder with
ME1 stenciled on the outer surface. The remaining Bays will contain Cylinders with ME2 or
ME3 stenciled on the outer surface. The Nose Assembly contains a single walled 28” outside
diameter Cylinder with QEN stenciled on the surface. For specific Cylinder quantities and
placement, see reference drawings in back.
Warning:
Placing the wrong type Cylinder in the nose or any Bay may result in
impact performance outside of MASH criteria.
Figure 29
Locate Diaphragm No. 2
Figure 28
FENDER PANEL
MUSHROOM
WASHER
CORRECT
INCORRECT
STAND-OFF
DIAPHRAGM #2