Trinity Highway QuadGuard Elite M10, Руководство по сборке изделия

Страница: 30 / 60

TrinityHighway.com 29 Revision C September 2021
Step 2. Monorail Assembly
Locate the Monorail on the construction line as shown in the Monorail Assembly drawings.
Drill 5 3/4” [146 mm] deep anchor holes using the Monorail as a template (Figure 19). Do
not drill through the pad. Anchor each Monorail section using the provided approved
adhesive kits.
Warning:
Improper alignment at the Monorail Splice Joints will prevent proper
system collapse during an impact.
Warning:
Every hole and slot in Backup and Monorail must have an approved
adhesive stud anchoring it.
It is important to align each Monorail segment vertically to (±1/16” [2 mm]) (Detail 16a).
Anchor each Monorail section using the provided Trinity Highway approved adhesive kit.
Do not drill though foundation.
Figure 18
Proper Stud Height
Figure 19
Backup and Monorail Location for Tension Strut Backup
3/4” x 7” STUD
TENSION STRUT BACKUP
4” [100 mm]
MONORAIL
CENTERLINE
CONSTRUCTION LINE
CONCRETE PAD
ANCHOR
WASHER
ROADWAY
BACKUP OR MONORAIL
NUT
CAUTION: 1 1/2” [38 mm]
Maximum stud height
Top surfaces
(±1/16” [2 mm]
Tongues must be
fully inserted Detail A
Figure 20
Rail Height and Alignment
Detail A