Trinity Highway QuadGuard Elite M10, Руководство по сборке изделия

Страница: 4 / 60

TrinityHighway.com 3 Revision C September 2021
Customer Service Contacts
Trinity Highway is committed to the highest level of customer service. Feedback regarding the
QuadGuard
® Elite M10 system, its assembly procedures, supporting documentation, and
performance is always welcome. Additional information can be obtained from the contact
information below:
Trinity Highway
Telephone
(888) 323-6374 (USA)
+1 312 467 6750 (International)
Contact Link TrinityHighway.com/Contact
Abbreviations
AASHTO American Association of State Highway and Transportation Officials
FHWA Federal Highway Administration
MASH Manual for Assessing Safety Hardware
MUTCD
Manual on Uniform Traffic Control Devices
NHS National Highway System
Important Introductory Notes
The performance of the QuadGuard ® Elite M10 as designed, and approved for reimbursement by
the FHWA pursuant to its MASH standard, is dependent upon the proper assembly, deployment
and future maintenance of the system. These instructions should be read in their entirety and
understood before assembling the QuadGuard
® Elite M10. These instructions are to be used in
conjunction with the assembly of QuadGuard ® Elite M10 system and are for standard assemblies
only as specified by the applicable highway authority. If you need additional information, or have
questions about the QuadGuard
® Elite M10, please contact the highway authority that has
planned and specified this assembly and, if needed, contact Trinity Highway Customer Service.
This product must be assembled in the location specified by the appropriate highway authority. If
there are deviations, alterations, or departures from the assembly protocol specified in this
manual, the device may not perform as tested.
Important:
DO NOT use any component part that has not been specifically
approved for this system during the assembly or repair of this system.
This product has been specified for use by the appropriate highway authority and has been
provided to that user who has unique knowledge of how this system is to be assembled. No
person should be permitted to assist in the assembly, maintenance, or repair of this system that
does not possess the unique knowledge described herein. These instructions are intended for
an individual qualified to both read and accurately interpret them as written. These instructions
are intended only for an individual experienced and skilled in the assembly of highway products
that are specified and selected by the highway authority.
A Manufacturer’s Drawing Package will be supplied by Trinity Highway upon request. Each
system will be supplied with a specific drawing package unique to that system. Such drawings
take precedence over information in this manual and shall be studied thoroughly by a qualified
individual who is skilled in interpreting them before the start of any product assembly.