Trinity Highway QuadGuard Elite M10, Руководство по сборке изделия

Страница: 7 / 60

TrinityHighway.com 6 Revision C September 2021
System Overview
The QuadGuard ® Elite M10 is a potentially reusable, re-directive, non-gating crash cushion for
roadside features of 24” [610 mm] or less in width with use of an approved transition. It consists
of energy-absorbing high density polyethylene cylinders surrounded by a framework of
Quad-
Beam Fender Panels.
Important:
Trinity Highway makes no recommendation whether use or
reuse of any part of the system is appropriate or acceptable following an
impact. It is the sole responsibility of the project engineer and/or the local
highway authority and its engineers to make that determination. It is critical
that you inspect this product after assembly is complete to make certain that
the instructions provided in this manual have been strictly followed.
The QuadGuard ® Elite M10 system utilizes two types of Cylinders in a “staged” configuration that
are designed and tested to address vehicles as defined by MASH for both lighter cars and heavier,
high center-of-gravity vehicles.
Impact Performance
The 8 Bay QuadGuard ® Elite M10 systems have successfully passed the requirements stipulated
in MASH, Test Level 3 tests with both the light car and pickup trucks at speeds of up to 62 mph
[100 kph] at redirection impact angles up to 25 degrees.
During head-on impact testing, within MASH criteria, the QuadGuard ® Elite M10 has been shown
to telescope rearward to absorb the energy of impact. When impacted from the side, within the
applicable MASH criteria, it has been shown to redirect the vehicle back toward its original travel
path and away from the highway feature.
Warning:
It is the sole responsibility of the project engineer and/or local highway
authority and its engineer to ensure that the QuadGuard ® Elite M10 and delineation
used meet all federal, state, specifying agency, and local specifications.
Warning:
It is the sole responsibility of the project engineer and/or local highway
authority and its engineer to ensure that the QuadGuard ® Elite M10 meets all
appropriate MUTCD and local standards.
Inspect Shipping
Check the received parts against the shipping list supplied with the system before deploying the
QuadGuard
®
Elite M10 . Make sure all parts have been received.
Important:
The Manufacturer’s Drawing Package supplied with the QuadGuard ®
Elite M10 must be used with these instructions for proper assembly and should
take precedence over these general instructions.
Warning:
Do NOT modify the QuadGuard ® Elite M10 in any way.