Trinity Highway QuadGuard Elite M10, Руководство по сборке изделия

Страница: 40 / 60

TrinityHighway.com 39 Revision C September 2021
15) Attach Hit Indicator to Diaphragm No. 1
The Hit Indicator should be the last component attached to the system. Fasten the Hit Indicator
to the first Diaphragm with the hardware provided as shown in Figure 36. Offset component to
right side of Diaphragm.
Step 1. Position Hit Indicator on 1
st
Diaphragm. Center Hit Indicator 2 1/2" from edge of
Diaphragm for 24” systems. Drill one 1/4" hole as needed to set bracket tab in
Diaphragm.
Step 2. Attach hit indicator to 1 st Diaphragm.
Option 1. Match drill two 9/16” holes as needed in Diaphragm. Use 1/2" hex bolts,
1/2" lock washers, and 1/2" hex nuts to attach bracket (p. 14).
Option 2. Use 1/4" self-dr tap screws along with flat washer to attach bracket.
Step 3. Rotate Hit indicator to horizontal position and bend trigger clip around top of 2 nd
diaphragm (Figure 37).
Figure 36
Attach Hit Indicator
Figure 37
Rotate Hit Indicator/Bend Trigger Clip
HIT INDICATOR
1/4x1 SCREWS
WASHER, LOCK, 1/2
NUT, HEX,1/2
BOLT, HEX, 1/2x1