Trinity Highway QuadGuard Elite M10, Руководство по сборке изделия

Страница: 42 / 60

TrinityHighway.com 41 Revision C September 2021
QuadGuard
®
Elite M10 Final Inspection Checklist
Site Location: ___________________________
Date: __________________________________
Inspector: ______________________________
Refer to the QuadGuard
®
Elite M10 Assembly manual and/or drawing package.
If no transition is used, narrow side panels are used with Backup (p. 8)
Proper Transition Panel is used for the type of barrier (pp. 15 - 16)
Minimum clearance of 25” behind rear Fender Panels for movement (p. 18)
Anchor nuts are torqued to 100 ft-lb (p. 20)
Cylinder types are properly placed (p. 23)
Every borehole and slot in Backup and Monorail is utilized (pp. 28 - 29)
Anchor stud(s) height is 1 1/2” [38 mm] or less above the pad (p. 29)
Monorail guides are attached to the Diaphragms (p. 31)
Monorail End Cap Assembly in place (p. 32)
Fender Panel nuts are bottomed out on Mushroom Washer bolt (p. 33)
Mushroom Washers tabs lay flat within Fender Panel slots (pp. 34, 43)
Each Diaphragm and Backup Extension is attached (pp. 35 - 38)
Cylinders are bolted together and tight (pp. 35 - 38)
Bolts and nuts are properly tightened throughout the system (p. 40)
Fender Panel gap is 0.78” or less for Narrow systems (p. 40)
Nose Cylinder is level (p. 48)
System is clear of debris