Trinity Highway QuadGuard Elite M10, Руководство по сборке изделия

Страница: 39 / 60

TrinityHighway.com 38 Revision C September 2021
14) Attach Nose Belt
Finally attach the Nose Belt to the Fender Panels using 5/8” x 2” long hex bolts (6), 5/8” flat
washers (24) and 5/8” hex nuts (18), through the Belt Clamps (Figure 34).
The Nose of the system may be delineated to comply with local codes (chevron, reflectorized
sign, etc.).
Warning:
Placing the wrong type Cylinder in the Nose or any Bay may result in
impact standards outside of MASH criteria.
Adjust the hex nuts so that the faces of the flat washers are flush with the outside humps of
the Fender Panels (Figure 34).
Figure 34
BOLT, HEX,1/2x3 1/2
WASHER, FLAT,5/8x1 3/4
WASHER, FLAT, 1/2x1 3/8
BOLT, HEX,5/8x2
STOP, TAB, WRAP, WELDMENT
CLAMP, NOSE BELT
Figure 35
Attach Nose Belt to Fender Panels
WASHER, FLAT,5/8x1 3/4
RAIL BOLT 5/8x2
NOSE BELT CLAMP
NOSE BELT
WASHER, FLAT,5/8x1 3/4
BOLT, HEX,5/8x2, G5
STOP, TAB, WRAP, WELDMENT
RAIL NUT 5/8
NUTS ARE WELDED INSIDE STOP
TAB AND ARE NOT SEPARATE