Trinamic TMCM-1160 Скачать руководство пользователя страница 91

Страница: 91 / 110

TMCM-1160 CANopen® Firmware Manual • Firmware Version V3.20 | Document Revision V2.10 • 2019-JAN-04

91 / 110

9.1

Homing Methods

The TMCM-1160 supports a subset of different standard CANopen homing methods. The homing method

that is to be used can be choosen via object 6098

(section

9.2.5

Supported Homing Methods

Method

Description

No homing (default value for object 6098

Search the left end switch, then search the next encoder index pulse.

Search the right end switch, then search the next encoder index pulse.

Search the positive edge of the home switch, then search the next encoder index pulse.

Search the negative edge of the home switch, then search the next encoder index pulse.

Search the left end switch.

Search the right end switch.

Search the positive edge of the home switch.

Search the negative edge of the home switch.

Search next index pulse in negative direction.

Search next index pulse in positive direction.

The actual position is used as home position. All position values (objects 6062h, 6063h,

and 6064h) are set to zero, but the motor will not move.

Table 272: Supported CANopen Homing Methods

When using homing methods that need end switch inputs or home switch inputs please take care of their

conﬁguration (object 2005

, section

4.2.6

9.1.1

Homing Method 1: Homing on negative Limit Switch and Index Pulse

Using this method, the initial direction of movement shall be leftward if the negative limit switch is inactive

(here: low). The home position shall be at the ﬁrst index pulse to the right of the position where the

negative limit switch becomes inactive.

Index pulse

Negative limit switch

Figure 10: Homing Method 1

Terms of delivery and rights to technical change reserved.
Download newest version at

www.trinamic.com

Содержание TMCM-1160















































































































Результаты поиска

Содержание TMCM-1160

Отзывы:

Trinamic TMCM-1160, Руководство пользователя, Страница: 91 / 110

Результаты поиска

Содержание TMCM-1160

Отзывы: