Trinamic TMCM-1160 Скачать руководство пользователя страница 21

Страница: 21 / 110

TMCM-1160 CANopen® Firmware Manual • Firmware Version V3.20 | Document Revision V2.10 • 2019-JAN-04

21 / 110

3.1.10

Object 1011

: Restore Parameters

With this object the default values of parameters according to the communication or device proﬁle are

restored. By read access the device provides information about its capabilities to restore these values.

There are several parameter groups:

• Sub-index 0

: contains the largest sub-index that is supported.

• Sub-index 1

: restores all parameters (factory reset).

• Sub-index 2

: restores communication parameters 2704

and 2705

• Sub-index 3

: restores device proﬁle parameters.

• Sub-index 4

: restores motor 0 parameters.

Note

In order to avoid restoring the parameters by mistake, restoring is only executed

when a speciﬁc signature is written to the appropriate sub-Index. This signature

is "load" (64616F6C

, see also table

Load Signature

Table 26: Load Signature

On reception of the correct signature in the appropriate sub-index the device restores the parameter

and then conﬁrms the SDO transmission (initiate download response). If the restoring failed, the device

responds with an abort SDO transfer (abort code: 06060000

). If a wrong signature is written, the device

refuses to restore and responds with abort SDO transfer (abort code: 0800002x

On read access, each sub-index provides information if it is possible to restore the parameter group. It

reads 1 if yes and 0 if no.

After the default values have been restored they will become active after the next rest or power cycle of

the TMCM-1160.

Object Description

Index

Name

Object Type

Data Type

1011

Restore parameters

Array

UNSIGNED32

Table 27: Object Description (1011

)

Terms of delivery and rights to technical change reserved.
Download newest version at

www.trinamic.com

Содержание TMCM-1160















































































































Результаты поиска

Содержание TMCM-1160

Отзывы:

Trinamic TMCM-1160, Руководство пользователя, Страница: 21 / 110

Результаты поиска

Содержание TMCM-1160

Отзывы: