TransCore 1422E, Руководство пользователя

Страница: 36 / 102

User Guide
TransCore Proprietary 4-4
9. Vin and -Vin wires through cable gland, housing, and insert assemblies.
NOTE: Power cable requires 18 AWG stranded wire or larger, with a minimum
insulation rating of 70C and 150V. Wire must meet EN 60950-1 or other applicable
component standards.
NOTE: External 10A-rated fast-acting fuse required in-line with positive terminal for
proper system operation and protection. Fuse must meet EN60950-1 or applicable
component standard(s).
10. Loosen wire retention screws on wire harness, insert wires into their respective pins, and
tighten retention screws to ensure wires cannot be removed
11. Insert wire harness into insert clip until the tabs click into place
12. Place insert back into plug housing and tighten set screw.
NOTE: If set screw will not tighten, remove insert and ensure set screw is properly aligned with
the hole on the plug housing.