TransCore 1422E, Руководство пользователя

Страница: 66 / 102

AI1422E Reader
TransCore Proprietary 7-17
524 Display Appended Information Status
Command
!524
displays the information being appended to the reader transmissions.
Command
!31N
appends information. Append time and date are not available to the
AI1422E Reader.
Reader message:
where
IDAP T<0> D<0> X<0 to 1>
T0 Time not appended
T1 Time appended (not valid for the AI1422E Reader)
D0 Date not appended
D1 Date appended (not valid for the AI1422E Reader)
X0 Auxiliary information not appended (factory default)
X1 Auxiliary information appended
One space is required between each value. For example, if factory-default settings are
assigned, the reader response is
IDAP T0 D0 X0
indicating time, date, and auxiliary information not appended.
525 Display Communications Protocol Status
Command
!525
displays the status of command !61N Selected Communications Protocol,
Selected Mode of Flow Control, and command !612NN ECP Timeout.
Reader response:
ECPS P<0 to 2> T<01 to FF> X<0 to 2> S0
where
P0
Basic protocol enabled (factory default)
7-20 TransCore Proprietary
P1
ECP enabled
P2 data inquiry protocol enabled
Txx ECP timeout where xx = 01 to FE (hexadecimal) Timeout (ms) = 50 * xx
If xx = FF timeout disabled
X0
Flow control disabled
X1 Software flow control enabled (factory default)
S0 start of message character is !
For example, if factory default settings are assigned, the reader message is:
ECPS P0 TFE X1 S0
which means basic protocol enabled, an ECP timeout of 254 (12,700 ms, 12.7 sec), software