TransCore 1422E, Руководство пользователя

Страница: 84 / 102

AI1422E Reader
TransCore Proprietary 7-35
Table 7 – 19 Input Inversion Options
Reader response:
Done
695S...S Set Serial Number
Command !
695
assigns the reader serial number according to the format:
695SSSSSS
where
SSSSSS
is the serial number.
The serial number may contain as many as six uppercase or lowercase ASCII alphanumeric
characters.
Note: The factory-assigned serial number of the reader contains seven characters.
However, to maintain backward compatibility, the reader software allows only six
characters to be entered. When setting the serial number, skip the fourth (middle)
character of the seven-character number shown on the reader product label.
Note: Once assigned, the serial number is preserved during power-down and the
loading of default parameters.
Reader response:
Done
696S...S Store Hardware Configuration String
Command !696S...S stores hardware configuration information into reader memory.
The hardware configuration string is assigned according to the following format:
696S...S
where
S...S is the hardware configuration string that may contain as many as 20 uppercase or
lowercase ASCII alphanumeric characters.
Note: Once assigned, configuration information is preserved during power-down
and the loading of default parameters.
Reader response:
Done
Command Options
6940 Disable input inversion (factory default)
6941 Enable input inversion