TransCore 1422E, Руководство пользователя

Страница: 75 / 102

User Guide
TransCore Proprietary 7-26
though F or a through f
where
NN = 00 to FF (hex for 0 to 255, factory default = 00).
Reader response:
Done
610 Select Basic Communication Protocol (Factory Default)
Command !
610
enables the basic communications protocol.
Reader response:
Done
611 Select Error Correcting Protocol
Command !
611
enables the error correcting protocol. For more details on Error Correcting
Protocol, contact TransCore.
Reader response:
Done
613 Enable Data Inquiry Protocol
Command !
613
enable the data inquiry protocol. Refer to “Data Inquiry Protocol” on page
6-3 .
Reader response:
Done
6170 Disable Echo Mode
Command !
6170
disables the reader’s echo of received host commands. If operating
in basic protocol or data inquiry protocol, the reader echoes by default. As the reader
receives a host command, it echoes each character of the command. Once the entire
command has been received and processed, the reader transmits its response. If
echoing is disabled with command !
6170
, the reader does not echo the command, but
only transmits its response. The reader never echoes while in ECP or download mode
operation.
Reader response:
Done
6171 Enable Echo Mode (Factory Default)
Command !
6171
enables the reader to echo received host commands. Command
!
6170
disables echo mode.
Reader response:
Done
620N Set Output Control