TransCore 1422E, Руководство пользователя

Страница: 72 / 102

AI1422E Reader
TransCore Proprietary 7-23
533 Display Wiegand Retransmit Interval
Command !
533
displays the Wiegand retransmit interval. This interval specifies the delay
in seconds before the reader retransmits Wiegand data for a tag still in the read zone. The
factory default is 1 second.
Reader message:
WTI <01 to FF>
where
01 to FF = seconds (1–255) in hexadecimal.
Note: The actual value of the Wiegand retransmit interval may vary depending on
the operative tag read mode and the type of tag in the read field.
For example, 10 = 16 seconds and FF = 255 seconds. The retransmit interval in ATA tag
read mode is about twice these values.
534 Display Tag Translation Mode Status
Command !
534
displays tag translation mode status, enabled or disabled. If tag translation
mode is enabled, incoming full-frame tags in AAR or ATA format are translated according
to ISO standards. Refer to
“452 Disable Tag Translation Mode (Factory Default)” on page
7-12 for more information.
Reader message:
TT <0 to 1>
where
0
tag translation mode disabled
1 tag translation mode enabled
537 Display Echo Status
Command
!537
displays echo mode status. In basic protocol
(!610
Select Basic
Protocol), the reader may be configured to enable (
!6171
Enable Echo Mode) or disable
(
!6170
Disable Echo Mode) the echo of received commands. Refer to “6170 Disable Echo
Mode” on page 7-26 and “6171 Enable Echo Mode (Factory Default)” on page 7-26 “ for
more information.
Reader message:
ECHO <0 to 1>
where
0
Echo status disabled
1 Echo status enabled (factory default)