TransCore 1422E, Руководство пользователя

Страница: 74 / 102

AI1422E Reader
TransCore Proprietary 7-25
M3 Changes on either input reported
For example, if factory default settings are assigned, the reader message is
SSTC E0 M0
which means that input status change reports are disabled on both input0 and input1.
570 Display Tag Protocols
Command !570 displays the currently selected tag protocol. Reader response:
ATA:<E, D> eGo:<I, F, D> SeGo:<I, F, D> IAG:<E, D> Sort:<E, D>
TMM0
where
I
ID (64 bits)
E Enabled
F
Full transaction (eATA)
D Disabled
TMM0 Fixed
577 Report Buffered Handshakes
Command
!577
reports the buffered handshakes.
Reader message:
XX
where
XX
is number of handshakes
!582 Display Synchronization Values
Command !
582
displays the synchronization values, which are typically used to alleviate
interference issues in dense populations of Interagency Group (IAG) readers.
The values are set with commands !
648NN
and !
649NN
. Reader Response:
SYNC T<00 to FF> H<00 to 0A>
Where T is the number of milliseconds (ms) before the reader sends a synchronization
pulse to all other readers on the RS–485 bus and H is the number of milliseconds that the
reader holds off starting IAG tag protocol once it receives the synchronization pulse.
Reader Control Functions — Command Group 6
Group 6 commands set reader control functions such as reader ID, communication
protocol, output pulse, and RF control.
60NN Set Reader ID Number
Command !60NN sets the reader ID that will be sent in the auxiliary data field (command
!
311
). Uppercase or lowercase characters are allowed for NN; for example, hex digits A