TOYOTA
LAND CRUISER
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 9 of 27 pages
Issue: C 08/19/10
(e)
Use the existing Vehicle's Bolt to secure the
V4 Harness's Ground Terminal with the
Vehicle's Ground Terminal. (Fig. 2-4)
(1)
Make sure that the Vehicle's Ground Terminal
Pin seats properly.
(f)
Locate and remove the Vehicle's White 10P
Connector from the Connector Block in the
Glove Box Area. (Fig. 2-5)
(g)
Plug in the V4 Harness’s White 10P
Connectors in between the Vehicle
Harness’s White 10P Connector and the
Connector Block. (Fig. 2-6)
(1)
Verify secure connection.
(h)
Push the 10P Connectors through the
opening between the Vehicle Harness and
the Passenger's Side Connector Block as
shown. (Fig. 2-7)
Fig. 2-4
Vehicle's
Ground
Terminal
Bolt
10mm Socket
V4 Harness's Ground Terminal
Fig. 2-5
Passenger's Side
Connector Block
Vehicle’s 10P
(White)
Fig. 2-6
V4 Harness'
White 10P
V4 Harness
Vehicle Harness'
White 10P
Passenger's Side
Connector Block
V4 Harness'
White 10P
Fig. 2-7
Vehicle
Harness
V4 Harness
Passenger's Side
Connector Block
10P
