TOYOTA
LAND CRUISER
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 15 of 27 pages
Issue: C 08/19/10
(h)
Locate the Vehicle’s 2P Pre-Connector.
(Fig. 5-5)
(i)
Remove the Break Away Tape from the
Connector. (Fig. 5-5)
(j)
Connect the V4 2P Connector to the
Vehicle’s 2P Pre-Connector. (Fig. 5-6)
(k)
Secure the 2P Connectors to the Vehicle
Harness with 1 Wire Tie. (Fig. 5-7)
(l)
Route the remaining V4 Harness along the
Vehicle Harness towards the Passenger’s
Cowl Area. (Fig. 5-8)
(m)
Secure the V4 Harness to the Vehicle
Harness using 1 Wire Tie. (Fig. 5-8)
Fig. 5-6
10mm Socket
Side Cutter
Fig. 5-5
2P Pre-
Connector
Fig. 5-7
Side Cutter
Fig. 5-8
Side Cutter
