TOYOTA
LAND CRUISER
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 22 of 27 pages
Issue: C 08/19/10
(dd)
Close the Hood. (Fig. 7-16)
(ee)
The Hazard Lights flash twice. Registration
is completed (Fig. 7-16)
If this procedure failed, the Hazard Lights flash
3 times. Registration was not set.
•
Disconnect the 1P RES Diagnostic
Connectors, then open the Hood.
Start again from Step d.
(ff)
Disconnect the V4 Harness's 1P RES
Diagnostic Connectors. (Fig. 7-17)
(gg)
Secure the V4 Harness and 1P Connectors
with Electrical Tape as shown. (Fig. 7-17)
(hh)
Secure the V4 Harness to the Vehicle
Harness with the Electrical Tape as shown.
(Fig. 7-17)
(ii)
Press the Vehicle’s “Engine Start Stop”
Button to place the Vehicle in the "OFF"
(Indicator Light off) position.
Fig. 7-16
EXAMPLE
V4 Diagnostic 1P Connectors
Fig. 7-17
Electrical
Tape
