TOYOTA
LAND CRUISER
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 7 of 27 pages
Issue: C 08/19/10
(k)
Remove 2 Screws from the bottom of the
Glove Box. (Fig. 1-11)
(l)
Open the Glove Box Door, then remove 2
Bolt Covers from the Glove Box.
(Fig. 1-12)
(m)
Dislodge the Glove Box(Fig. 1-12)
(1)
Remove 2 Bolts.
NOTE:
Pull down and out to avoid damaging
the Vehicle Clips or Dash Trim.
(n)
Remove the Vehicle Harness from the
backside of the Glove Box, then remove the
Glove Box. (Fig. 1-13)
(1)
Disconnect any Connectors.
(o)
Temporarily install the Passenger's Side
Knee Air Bag. (Fig. 1-14)
CAUTION:
Sharp metal edges.
Fig. 1-11
Screws (x2)
Phillips Screwdriver
Fig. 1-12
Nylon Panel Removal Tool, 10mm Socket
Cover
Bolt
Cover
Bolt
Glove Box
Fig. 1-13
Vehicle Harness
Glove Box
(backside)
Fig. 1-14
10mm Socket
Bolts (x2)
Bolts (x2)
Knee Air Bag
