TOYOTA
LAND CRUISER
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 23 of 27 pages
Issue: C 08/19/10
8.
Tags and Label Installation.
●
For US Vehicles use the English Labels and
discard the Spanish Labels.
●
For Mexico Vehicles use the Mexico Labels,
and discard the English Labels.
(a)
Remove 2 of the Remote Controls from
their protective bag.
(1)
Use a utility knife, to cut a slit in each bag.
(b)
Using VDC approved cleaner and Cleaning
Method, clean the area indicated on the
Remote Controls. (Fig. 8-1)
(c)
Attach the Key Label to the Remote
Controls as shown. (Fig. 8-1)
(1)
Use a piece of the clean adhesive tape to lift the
labels off their protective backing.
CAUTION:
Do not touch the adhesive surface.
(d)
Attach the Remote Engine Starter Tags to
the Vehicle Remote Controls. (Fig. 8-2)
(e)
Using VDC approved cleaner and Cleaning
Method, clean the area indicated on the
Engine Compartment Cover.(Fig. 8-3)
(f)
Attach the Warning Label to the Engine
Compartment Cover as shown. (Fig. 8-3)
CAUTION:
Do not touch the adhesive surface.
Fig. 8-2
Key Tag
Fig. 8-1
Utility Knife, Clear Tape
Key
Label
2mm
2mm
Key
Label
3 Button Key
4 Button Key
Fig. 8-3
Clear Tape
