TOYOTA
LAND CRUISER
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 11 of 27 pages
Issue: C 08/19/10
(b)
Remove the Backing Sheet of 1 Waterproof
Sheet and attach it to the RES ECU near the
connectors as shown. (Fig. 3-2)
CAUTION:
Do not touch the adhesive surface.
(c)
Insert the RES ECU Bracket into the
indicated Bracket Slots on the RES ECU.
(Fig. 3-3)
(1)
Ensure the Bracket is firmly attached to the
ECU.
(d)
Apply 1 strip of Large Foam Tape to the
RES ECU as shown. (Fig. 3-4)
(e)
Turn over the Floor Carpet on the left side
of the Passenger's Side Area. (Fig. 3-5)
(f)
Pull back the Felt on the backside of the
Floor Carpet as shown. (Fig. 3-5)
(1)
Do not remove or cut off the Felt.
Fig. 3-3
RES ECU
RES ECU Bracket
Fig. 3-5
Felt
Floor Carpet
Fig. 3-4
RES ECU
Large Foam
Tape
Fig. 3-2
Waterproof Sheet
RES ECU
