TOYOTA
LAND CRUISER
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 19 of 27 pages
Issue: C 08/19/10
(m)
Connect the Techstream
Notebook to the Vehicle’s
Diagnostic Port. (Fig. 7-7)
(n)
With the Remote Control Key
in your possession, press the
Vehicle’s “Engine Start Stop”
Button twice to select the
Ignition “ON” position.
Note:
Do not apply Brake Pedal.
(o)
Start the TIS Techstream
Application by clicking on
the shortcut located on the
Desktop.
(p)
Click “Connect to Vehicle.”
(Fig. 7-8)
(q)
Confirm that the information
displayed on the Vehicle
Connection Wizard is correct
for the Vehicle. If not verify
that the Techstream is
properly connected. (Fig. 7-9)
(r)
Under Option, select
“Others” then Click “Next>.”
(Fig. 7-9)
Fig. 7-7
Vehicle Diagnostic Port
Techstream
Notebook
Fig. 7-8
Fig. 7-9
Others
