Toshiba SATELLITE 2610 Series, Руководство пользователя

Страница: 108 / 208

User's Manual Setup and Password Security 8-17
Version
8
Last Saved on 19/09/99 14:08
Satellite 2610/2650 User's Manual – 08CHAP.DOC – ENGLISH – Printed on 19/09/99 as 08_261UK
Changing values in the TSETUP menu
1. Press
←
and
→
to move between the two columns. Press
↑
and
↓
to
move between items in a column.
2. Press either the space bar or
BkSp
to change the value.
3. Press
PgUp
or
PgDn
to change pages.
On either page, you can go directly to a specific group by pressing the
first letter (highlighted) of the group’s name. For example, press
B to go
to the
Battery
group.
Accepting changes and exiting SYSTEM SETUP
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the
following message is displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following
message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to
reboot.
2. To make other changes, press N . Repeat the steps above.
3. To accept the changes, press Y .
You can press
Esc
to quit at any time without saving changes. TSETUP
asks you to confirm that you don’t want to save your changes.
Default configuration
When you access TSETUP, the current configuration is displayed.
1. To show the default configuration, press
Home
.
2. To accept the default settings, press
End
and then press
Y
.
When you execute the default setting, the following settings are not
changed:
• Hard Disk Mode
• Password
• Write Policy