Connecting Hardware Devices
Expansion cards
99
1
If the server is in operation, shut it down. Then remove the access panel. For
detailed instructions, read Steps 1 through 4 in
Maintenance overview
on page 50.
2
If necessary, change the jumper and/or DIP switch settings on the expansion card
you are installing. For more information on configuring the expansion card, refer to
the user’s guide that came with the device.
3
Lift the card support and remove the expansion slot cover from the slot in which the
expansion card is being installed. Make sure that the expansion slot you select
satisfies the conditions and restrictions of the expansion card you are installing.
Removing the expansion slot cover
4
Insert the expansion card in the slot, then lower the card support to hold the
expansion card in place.
Inserting the expansion card
5
Reinstall the access panel, reconnect all signal and power cables, then turn on the
server. For instructions, read Steps 6 through 9 in
Maintenance overview
on page
50.
Installing an expansion card while the power is on may damage the server and the
expansion card.
Содержание Magnia 3310
Страница 1: ......
