Toshiba Magnia 3310, Руководство пользователя

Страница: 49 / 335

Connecting Hardware Devices
Installing optional devices
49
Selecting a workplace
❖
Before performing server maintenance, select a workplace that is as free of dust as
possible.
❖
The ambient temperature and relative humidity should range between 50°F to 95°F
(10
°
C to 35
°
C) and 30% to 80%. Avoid exposing the server to drastic temperature
fluctuations that could cause condensation.
❖
Never install or remove devices in a static-inducing environment (on a carpet, for
example). Electronic devices can fail if they are exposed to electrostatic discharge
(ESD).
Working safely
❖
Make sure you read and understand the instructions and precautions in this guide
before performing server maintenance.
❖
Perform the steps in each procedure in the order written.
❖
Before disconnecting any cables, note their positions to make sure you can reconnect
them correctly.
❖
Check cable connectors for broken or bent pins. If a cable connector has screws,
tighten the screws when securing the cable.
❖
If a failure occurs, consult your authorized Toshiba Magnia service provider.
Internal server components can be seriously damaged by static electricity.
Wear a wrist or heel ground cable to discharge static electricity carried on your
body. If such equipment is not available, touch a grounded metal object to
discharge static electricity before working on sensitive electronic components.
Once you remove a device from its antistatic package, place the antistatic
package and the device on a flat, grounded surface. Store the antistatic
package for future use.
To prevent static build-up, never drag the server when moving it.