Toshiba Magnia 3310, Руководство пользователя

Страница: 104 / 335

Connecting Hardware Devices
Power supply units
104
Replacing an EPS-R power supply unit
1 If fitted, remove the security bracket attached to the EPS-R unit.
2 Loosen the thumbscrew to release the EPS-R power supply unit from the power
supply cover plate.
3 Press the locking lever toward the empty power cord socket, then grasp the handle
and pull the power supply from the EPS-R cage.
Removing the EPS-R unit
4 Position the EPS-R power supply unit in the empty bay.
The procedures in this section require specific technical knowledge and
experience. If you have no experience of installing/removing optional devices,
or if the job seems difficult, consult your authorized service provider. Toshiba
assumes no liability for damages if you install and/or remove optional devices
yourself.
Use extreme caution when replacing an EPS-R power supply unit while the
server is in use. An error during power supply replacement while the server is
on can damage the server and cause data and/or programs to be lost or
destroyed.
Never use the handle of the EPS-R power supply unit to lift or move the server.
Using the handle can cause severe damage to the power supply, the EPS-R cage,
and/or internal server components.