Toshiba e-STUDIO305CP, Руководство по печати

Страница: 80 / 142

2 PRINTING FROM WINDOWS
78 Setting Up Print Options
This function is available only for the models below.
- e-STUDIO6570C Series
- e-STUDIO6550C Series
- e-STUDIO4540C Series
- e-STUDIO507 Series
- e-STUDIO456 Series
- e-STUDIO2550C Series
- e-STUDIO5055C Series
- e-STUDIO407CS Series
- e-STUDIO527S Series
- e-STUDIO306LP
6) SNMP Communication
This enables SNMP communication between this equipment and your computer to retrieve the option
configuration information.
If you disable SNMP Communication, TopAccessDocMon notification also will be disabled.
7) [SNMP Settings]
Click this button when you need to verify or change the SNMP settings.
 P.81 “SNMP Settings”
In order to set [SNMP Settings], you must access the printer driver properties from the [Devices and
Printers] folder (Windows Vista / Windows Server 2008: [Printer], Windows Server 2003: [Printers and
Faxes]), but not from the [Print] dialog box in the application.
8) [Output Devices]
This switches the equipment to be used for printing or splits one print job between two pieces of equipment
(Tandem Printing).
 P.133 “Switching equipment to print jobs”
 P.134 “Splitting a print job across two pieces of equipment (Tandem Printing)”
9) [Add Printer]
This discovers the e-STUDIO Series equipment over a network and adds it on [Printer Folder].
 P.82 “Add Printer”
10)[Custom Paper Size]
Click this to specify the custom paper size. The [Custom Paper Size] dialog box appears when you click
this.
 P.83 “Custom Paper Size”
 In order to set [Custom Paper Size], you must access the printer driver properties from the [Devices
and Printers] folder (Windows Vista / Windows Server 2008: [Printer], Windows Server 2003:
[Printers and Faxes]), but not from the [Print] dialog box in the application.
 The [Custom Paper Size] can be set only by an operation with the administrator privilege.
11)User name (Alias)
Enter a nickname as required, which is displayed on the Private Print job list and Hold Print job list. You
can specify the desired name so that you can easily find the target job from the job list when releasing it
from the equipment’s touch panel.