Toshiba e-STUDIO305CP, Руководство по печати

Страница: 64 / 142

2 PRINTING FROM WINDOWS
62 Setting Up Print Options
5) Smoothing
Select this check box to print texts and graphics smoothly.
 This option is available only when your equipment is a multifunctional digital system (Black and
White MFP).
 When [Resolution] is set to [1200 dpi] on some models, [Smoothing] cannot be set.
6) Distinguish Thin Lines
Select this check box to print thin lines clearly.
 When your equipment is a multifunctional digital color system (color MFP), see the following page to
enable this option.
 P.63 “Setting: [Basic] tab”
 This function is not available to some models.
7) Use Black for All Text
Select this check box to print all text in 100% black except white texts.
 When your equipment is a multifunctional digital color system (color MFP), see the following page to
enable this option.

P.63 “Setting: [Basic] tab”
 This function is not available to some models.
8) Resolution
This sets the resolution for printing.
- 600 dpi — Select this to print in 600 x 600 dpi.
- 1200 dpi
*1
— Select this to print in 1200 x 1200 dpi.
*1 Images are reproduced more smoothly because jaggies on the outlines of small text or fine lines such as graphics are
suppressed.
However, 600 dpi is recommended for photos because the tone reproduction level of the image is higher.
Note that if the resolution is 1200 dpi, it takes longer than 600 dpi to print out because the capacity of the data being handled
is larger.
 When your equipment is a multifunctional digital color system (color MFP), see the following page to
enable this option.
 P.63 “Setting: [Basic] tab”
 [Resolution] is available only when printing is performed in the model below.
- e-STUDIO527S Series
 [1200 dpi] is selectable only when the Universal Printer 2 (PostScript) / Universal PS3 printer driver
is used.
9) Printer Darkness
Select this check box and move the slider to the left to print lighter or to the right to print darker. The
darkness can be adjusted to five levels from -2 to 2.

This option is available only when your equipment is a multifunctional digital system (Black and
White MFP).
 This function is not available to some models.