Toshiba e-studio1105 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 396

Toshiba e-studio1105 Скачать руководство пользователя страница 63

System Settings on Main and Sub-machines

This section explains the System Settings on the two machines during Connect Copy.

General Features

How the defaults in the General Features of copying of the main and sub-machines are used in connect
copy will be explained.
Only the functions described in this section affect the Connect Copy function.

Panel Key Sound

• The main and sub-machines follow their respective set values.

Copy Count Display (copier/Document Server)

• The set values of the main and sub-machines do not affect the connect copy.
• The copy counter is always displayed as Up (count up).

Function Priority

• The set values of the main and sub-machines do not affect the connect copy.
• When the Auto Reset time of the main machine has lapsed, Connect Copy will be canceled.

After that, the machine switches back to the mode selected in Function Priority upon reaching
the System Reset time.

Print Priority

• The set values of the main and sub-machines do not affect the connect copy.
• When the Auto Reset time of the main machine has lapsed, Connect Copy will be canceled.

After that, the machine switches back to the mode selected in Function Priority upon reaching
the System Reset time.

Function Reset Timer

• The set values of the main and sub-machines do not affect the connect copy.

Interleave Print

• The set values of the main and sub-machines do not affect the connect copy.

Output: Copier

• The main and sub-machines follow their respective set values.

Output: Document Server

• The main and sub-machines follow their respective set values.

Paper Tray Priority: Copier

• The main and sub-machines follow their respective set values.

System Settings on Main and Sub-machines

61

1

«
...
61
62
63
64
65
...
»

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов