manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 207 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 207

Data compression communication settings

msh> ssh compression {on|off}

The default is "on".

SSH/SFTP communication port setting

msh> ssh port [22, 1024-65535]

The default is 22.

SSH/SFTP communication timeout setting

msh> ssh timeout [0-65535]

The default is 300.

SSH/SFTP communication login timeout setting

msh> ssh logintimeout [0-65535]

The default is 300.

Setting an open key for SSH/SFTP

msh> ssh genkey {512|768|1024} "character string"

Create an open key for SSH/SFTP communication.
Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".
The default key length is 1024, and the character string is blank.
If you do not specify this parameter, an open key with the default value will be created.

Deleting open key for ssh/sftp communication

msh> ssh delkey

• If you do not specify a character string, current setting is displayed.
• ssh can be used only with sftp.

status

Use the "status" command to display the printer status.

view messages

msh> status

• p.211 "Getting Printer Information over the Network"

Remote Maintenance by telnet

205

5

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов