Toshiba e-studio1105 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 396

Toshiba e-studio1105 Скачать руководство пользователя страница 15

How to Read This Manual

Symbols

This manual uses the following symbols:

Indicates important safety notes.
Ignoring these notes could result in moderate or minor injury, or damage to the machine or to property. Be
sure to read these notes. They can be found in the "Safety Information" section of About This machine.

Indicates points to pay attention to when using the machine, and explanations of likely causes of paper
misfeeds, damage to originals, or loss of data. Be sure to read these explanations.

Indicates supplementary explanations of the machine's functions, and instructions on resolving user errors.

This symbol is located at the end of sections. It indicates where you can find further relevant information.

[ ]

Indicates the names of keys that appear on the machine's display panel.

[ ]

Indicates the names of keys on the machine's control panel.

Names of Major Items

Major options of this machine are referred to as follows in this manual:

• Decurl Unit DU5000   Decurler
• High Capacity Stacker SK5010   Stacker
• Large capacity tray   LCT
• Wide large capacity tray   Wide LCT
• Finisher SR5000   Finisher
• Booklet Finisher SR5020   Booklet finisher
• Multi-Folding Unit FD5000   Multi-Folding Unit
• Perfect Binder GB5000   Perfect Binder

13

«
...
13
14
15
16
17
...
»

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов