manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 247 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 247

Required file server (<file server name>) not found

The required file server <file server name> could not be found.

sap enable, saptype=<SAP type>, sapname=<SAP name>

The SAP function was started. The SAP packet is issued to advertise the service in the SAP table on the
NetWare server.

session IPv4 <community name> not defined.

The requested community name is not defined.

session IPv6 <community name> not defined.

The requested community name is not defined.

session_IPX <community name> not defined.

The requested community name is not defined.

Set context to <NDS context name>

The NDS context name <NDS context name> has been set.

shutdown signal received. network service rebooting...

The network reboot process is starting.

SMTPC: failed to get smtp server ip-address.

The SMTP server IP address could not be obtained. This could be because:

• The specified DNS server could not be found.
• No connection to the network has been established.
• The specified DNS server could not be found.
• An incorrect DNS server is specified.
• The specified SMTP server IP address could not be found in the DNS server.

SMTPC: failed to connect smtp server. timeout.

Connection to the SMTP server failed due to timeout. This could be because the specified SMTP server
name is incorrect, or no connection to the network has been established, or the network configuration is
incorrect, so there is no response from the SMTP server. Check the SMTP server name, or the network
connection and configuration.

SMTPC: refused connect by smtp server.

Connection to the SMTP server is denied. This could be because server other than the SMTP server has
been specified, or the specified SMTP server port number is incorrect. Check the SMTP server name, port
number, or the SMTP server port number.

Message List

245

5

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов