manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 41 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 41

When sending e-mail to a SMTP server, you can enhance the SMTP server security level by connecting
to the POP server for authentication.
The default setting is [Off].
If you set POP before SMTP to [On], specify the waiting time after authentication, user name, e-mail
address, and password.

• Wait Time after Authent.: "300" msec.

Specify [Wait Time after Authent.] from 0 to 10,000 milliseconds, in increments of one
millisecond.

• User Name

Enter the user name using up to 191 characters. Spaces cannot be entered.

• E-mail Address

Enter the E-mail Address using up to 128 characters. Spaces cannot be entered.

• Password

Enter the password using up to 128 characters. Spaces cannot be entered.

To enable POP server authentication before sending e-mail via the SMTP server, set [POP before
SMTP] to [On]. E-mail is sent to the SMTP server after the time specified for [Wait Time after Authent.]
has elapsed.
If you select [On], enter server name in POP3/IMAP4 Settings. Also, check POP3 port number in E-
mail Communication Port.

Reception Protocol

Specify the Reception Protocol for receiving e-mail.
The default setting is [POP3].

POP3 / IMAP4 Settings

Specify the POP3/IMAP4 server name for receiving e-mail.
The specified POP3/IMAP4 server name is used for [POP before SMTP].
The default setting is [Auto].

• Server Name

If DNS is in use, enter the host name.
If DNS is not in use, enter the POP3/IMAP4 or server IPv4 address.
Enter POP3/IMAP4 server name using up to 127 characters. Spaces cannot be entered.

• Select Encryption as follows:

"Encryption"-[Auto]
Password encryption is automatically set according to the POP/IMAP server settings.
"Encryption"-[On]
Encrypt password.

File Transfer

39

1

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов